On today’s Instagram post, we showed you exactly how we professionally cleaned a pair of Off-White Chicago Jordan 1s using only the tools inside our ReviveKicks Shoe Cleaning Kit and Shoe Cleaning Bundle — plus a finishing touch with leather conditioner. This breakdown walks through each step of the process so you can learn to do it yourself the right way.
👉 Watch the full video here (← Update with actual post link)
🧽 Step-by-Step: Cleaning the Off-White Chicago 1s
These grails are made from a delicate mix of suede, mesh, and leather, so proper care is critical to preserve their value and structure.
1️⃣ Start With the Suede – Dry Clean Only
We began by using the ReviveKicks Shoe Eraser to gently dry clean the suede on the uppers. This lifts surface dirt and oils without darkening or damaging the nap. We followed with the Soft Bristle Brush to gently dust off the debris.
2️⃣ Deep Clean the Midsoles
Next, we applied ReviveKicks Shoe Cleaner with the Soft Bristle Brush, scrubbing the midsoles to lift built-up grime. We were careful not to splash the cleaner up onto the suede or leather. Once clean, we wiped everything down with a Microfiber Towel to prevent residue buildup.
3️⃣ Mesh Cleaning – Gentle & Controlled
Moving to the mesh portions, we used a soft, circular motion with the Soft Bristle Brush, keeping the surface lightly damp to avoid fraying. After scrubbing, we immediately dried the area with a microfiber towel to remove stains and prevent water spots.
4️⃣ Leather Spot Cleaning – Avoid Bleeding
For the red leather sections, we cleaned with a controlled amount of Shoe Cleaner using the soft brush, taking special care not to spread red dye onto the adjacent materials. This specific colorway is known for color bleed — so precision was key.
5️⃣ Stitch Detailing & Final Finish
We attempted to detail out red bleeding around the stitching near the heel, which appeared to be caused either from the factory or past improper cleaning. Once fully dry, we conditioned the leather uppers with Angelus Leather Conditioner, restoring softness and protection.
🛒 Want to Do It Yourself?
Everything used in today’s video is available in our online store — whether you’re cleaning Off-Whites or just looking to upgrade your sneaker care game.
👉 Shop All Products Here
✅ ReviveKicks Shoe Eraser
✅ ReviveKicks Shoe Cleaner
✅ ReviveKicks Soft Bristle Brush
✅ ReviveKicks Microfiber Towel
✅ Angelus Leather Conditioner
💬 Final Thoughts
Premium sneakers deserve premium care. Whether you're detailing your grails or learning how to treat luxury materials properly, our kits and daily tutorials are here to guide you.
🗓️ Check back tomorrow for another breakdown on our blog.
📦 Local in Las Vegas or nationwide? We also offer full-service cleaning — visit our Services Page to book your pair in today.
Stay fresh,
Revive Kicks Team
Let me know if you’d like the excerpt and meta description for this post next.
You said:
ChatGPT said:
Perfect — I’ve updated the blog draft with the correct video link. Here’s the final version:
Restoring Off-White Chicago 1s the Right Way — Full Breakdown Using Our Complete Kit
On today’s Instagram post, we showed you exactly how we professionally cleaned a pair of Off-White Chicago Jordan 1s using only the tools inside our ReviveKicks Shoe Cleaning Kit and Shoe Cleaning Bundle — plus a finishing touch with leather conditioner. This breakdown walks through each step of the process so you can learn to do it yourself the right way.
🧽 Step-by-Step: Cleaning the Off-White Chicago 1s
These grails are made from a delicate mix of suede, mesh, and leather, so proper care is critical to preserve their value and structure.
1️⃣ Start With the Suede – Dry Clean Only
We began by using the ReviveKicks Shoe Eraser to gently dry clean the suede on the uppers. This lifts surface dirt and oils without darkening or damaging the nap. We followed with the Soft Bristle Brush to gently dust off the debris.
2️⃣ Deep Clean the Midsoles
Next, we applied ReviveKicks Shoe Cleaner with the Soft Bristle Brush, scrubbing the midsoles to lift built-up grime. We were careful not to splash the cleaner up onto the suede or leather. Once clean, we wiped everything down with a Microfiber Towel to prevent residue buildup.
3️⃣ Mesh Cleaning – Gentle & Controlled
Moving to the mesh portions, we used a soft, circular motion with the Soft Bristle Brush, keeping the surface lightly damp to avoid fraying. After scrubbing, we immediately dried the area with a microfiber towel to remove stains and prevent water spots.
4️⃣ Leather Spot Cleaning – Avoid Bleeding
For the red leather sections, we cleaned with a controlled amount of Shoe Cleaner using the soft brush, taking special care not to spread red dye onto the adjacent materials. This specific colorway is known for color bleed — so precision was key.
5️⃣ Stitch Detailing & Final Finish
We attempted to detail out red bleeding around the stitching near the heel, which appeared to be caused either from the factory or past improper cleaning. Once fully dry, we conditioned the leather uppers with Angelus Leather Conditioner, restoring softness and protection.
🛒 Want to Do It Yourself?
Everything used in today’s video is available in our online store — whether you’re cleaning Off-Whites or just looking to upgrade your sneaker care game.
👉 Shop All Products Here
✅ ReviveKicks Shoe Eraser
✅ ReviveKicks Shoe Cleaner
✅ ReviveKicks Soft Bristle Brush
✅ ReviveKicks Microfiber Towel
✅ Angelus Leather Conditioner
💬 Final Thoughts
Premium sneakers deserve premium care. Whether you're detailing your grails or learning how to treat luxury materials properly, our kits and daily tutorials are here to guide you.
🗓️ Check back tomorrow for another breakdown on our blog.
📦 Local in Las Vegas or nationwide? We also offer full-service cleaning — visit our Services Page to book your pair in today.
Stay fresh,
Revive Kicks Team
